Large Injector Dispensing Gun Kit with 400ML Cartridge

Description

Concrete and Fiberglass Crack Repair Kit and Swimming Pool Tile Adhesive

Large Injector Dispensing Gun Kit Includes:

• 1 – INJECTOR GUN
• 1 – 400 ml SUPER EPOXY CARTRIDGE
• 2 – 400 ml STATIC MIXING TIPS
• 1 – NUT

Features:

• Chemical Resistant
• Non-sagging: Holds on Vertical Surface
• Installs tiles, Mosaics and Grout
• Set Rebar Dowels and Staples
• Set Wall Hooks and Hand Holds
• Concrete Crack Repair
• Fiberglass Repair
• Skimmer Repair

The surface must be clean and dirt-free.

Application Guide

1. Clean the surface thoroughly, ensuring it’s free from dirt, oil, and loose particles.
2. Insert the cartridge into the injector gun and attach the mixing tip.
3. Dispense a small amount of epoxy to ensure proper mixing.
4. Apply the epoxy to the prepared surface or into cracks as needed.
5. Smooth or shape the epoxy as required for your specific application.
6. Allow to cure for 24 hours before exposing to water or chemicals.

Best Practices for Using a Concrete Injector Gun

• Read Instructions: Always read and follow the manufacturer’s instructions for the injector gun and filler materials
• Wear Protective Gear: Use gloves and eye protection to prevent injury.
• Test First: Practice on a small area to get comfortable with the injector gun.

Frequently Asked Questions

• Can this epoxy be used underwater?

  No, the surface must be dry during application and initial curing.

• How long does it take to set?

  The initial set occurs within 2-4 hours, but the full cure takes 24 hours.

• Is it resistant to pool chemicals?

  Yes, AquaGuard Super Epoxy is highly resistant to common pool chemicals.