Epoxy Pool Paint – AquaGuard 5000®

$665.88

AquaGuard 5000 Epoxy Pool Paint

High Performance Pool Finish & Resurfacing Product

Top rated AquaGuard 5000® Epoxy Pool Paint is a high performance, 100% solids, epoxy phenolic resin with proprietary alkali curing agents, reinforced with proprietary additives for physical strength.

 

AquaGuard 5000® is formulated to be sprayed or roll applied to steel, concrete or fiberglass surfaces.

It can be sprayed in a single coat application or roll applied in 2 or 3 (recommended) coats.

This is a two component system: Resin and Activator. One unit will cover 600-700 Sq. Ft.

Description

Epoxy Pool Paint

AquaGuard 5000®– Epoxy Pool Paint is a high performance, 100% solids, epoxy resin with proprietary alkali curing agents.

This is a non-porous surface coating which cannot be penetrated by rust, algae, chlorine or other reactants  and makes most water and chemical stains easily removable with light washing or scrubbing. This means homeowners will have less maintenance, less chemical usage, and less time and money spent cleaning the surface of the pool. AquaGuard 5000®Epoxy Pool Paint is not only an aesthetic surface coating that will restore everlasting beauty to any pool, but will make the pool easier to clean and maintain over time.

Designer Series

Our Designer Series Epoxy Pool Paint color selections will add a depth of color and uniqueness while also camouflaging imperfections in the pool’s infrastructure, such as osmotic blistering that may appear as a result of fiberglass wearing out over time. Homeowners can purchase our portable dot sprayer for DIY application.

Our product is also FDA compliant to be potable and may be used in surge tanks, ponds, fountains, or dive tanks as well.

AquaGuard 5000 – Epoxy Swimming Pool Paint is:

  • Abrasion resistant
  • Resistant to chemical stains and algae
  • Formulated to adhere to Concrete, Steel and Fiberglass Surfaces
  • Great for DIY repairs to concrete and fiberglass surfaces
  • When Cured, the surface is hard & smooth like a Bathtub

Surface Preparation Requirements:

Concrete will need to be acid etched and neutralized, or pressure washed, depending on the severity of surface degradation. Concrete should be repaired and restored as necessary prior to application. Concrete and plaster surfaces will require a sealer/primer for reconditioning prior to application. 

Fiberglass will need be ground or abraded with a course grain emery disk to achieve an adequate surface profile or anchor pattern. No additional sealer/primer is needed for fiberglass application.

Chemical Resistant to 21 different chemicals including:

  • Chlorine
  • Acid
  • Salt Water
  • Gasoline

Available Colors:

  • Bahama Blue
  • Gulfstream Blue
  • Pearl White
  • Midnight Black
  • Stone Grey
  • Ice Blue
  • Miami Blue

 

More related Data Bulletins

*Please Note: Color may vary from samples shown on our website. 

Additional information

Weight 50 lbs
Dimensions 18 × 12 × 12 in
Select Color to Add to Cart

02 Bahama Blue, 07 Midnight Black, 03 Gulfstream Blue, 04 Pearl White, 06 Stone Grey, 05 Ice Blue, 01 Miami Blue

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…